
installing rear Floor (4-Door onlY)
10. Place the rear floor section into place. Tuck the liner around and underneath the front and rear seat
brackets (Fig. 8 and Fig. 9)
11. Once properly in place, pull
back part to access the four
pieces of hook fastener. Clean
surface with alcohol then
remove the film backing and
roll the part back into place.
Firmly press the top surface to
ensure adhesive attachment.
FITMeNT NOTe: The rear floor section
is designed to fit on top of the rear wheel
well pieces.
FIguRe 8:
FIguRe 9:
Jeep Wrangler Jk Bedrug/BedTred
Install Instructions
Jk
BEDRUG, INC.
n
635 Old Hickory Blvd, Old Hickory, TN 37138-3162
n
800-462-8435
n
bedrug.com
BeDtreD HooK &
looP PlaceMent
BR-BTJK07FINST
REV. 1 8/16/2013
Page 3 of 4