BedRug Bedliner Installation Instructions
Procedure
BRINST Rev. Level: 15 12/4/2009 Page 6 of 6
BEDRUG
®
CLEANING INFORMATION
The mildew resistant BedRug foam will not absorb liquids. The engineered polypropylene fiber top surface
resists stains and deterioration from most acids, chemicals, gas and oils, etc. Therefore, by following the
cleaning instructions below, your BedRug will remain serviceable for as long as you own your truck.
Cleaning your BedRug
is easy:
1.
A vacuum, broom, brush or compressed air can be used to remove dirt, grime, sand, mulch etc.
Due to the fact that water will not harm the BedRug
,
pressure washing is also an effective way to
clean a soiled BedRug.
2.
Although most acids will not harm the BedRug, baking soda should be applied immediately to
neutralize the acid to ensure the safety of the paint on the truck.
3.
To clean tougher jobs such as gasoline, oil, chemicals, acid spills or leaks from your BedRug, use a
detergent soap with degreaser and water, then rinse thoroughly. This detergent soap is used in most
car wash locations with pressure washing equipment. The BedRug polypropylene closed-cell foam
will not absorb water and the polypropylene fiber dries in minutes.
If you have additional questions, call BedRug, Inc. customer service at 800-462-8435
.
Retain this cleaning information with your vehicle owner’s manual for future reference.
BedRug, Inc.
LIMITED WARRANTY
BedRug, Inc. warrants BedRug
®
,
BedTred
TM
, VanRug
TM
, and VanTred
TM
, for pickup trucks and vans to be free
from defects in materials and workmanship. BedRug Bedliners will be warranted for the duration of the vehicle
ownership by the original BedRug purchaser. The terms of this warranty may vary from state to state. You may
have rights under specific state laws that differ from the terms of this warranty. Proof of purchase will be required
for warranty service. Customer modifications and/or improper return packaging of the product may void this
warranty. Product should be cleaned before return. For warranty instructions, returns and packaging contact
BedRug, Inc. Customer Service at 800-462-8435. Labor and shipping are not covered under the terms of this
agreement.
Retain this warranty information with your vehicle owner’s manual for future reference.
FOR WARRANTY SERVICE CALL 800-462-8435
