Bedrock Secure OSA Remote, Руководство пользователя

Страница: 54 / 110

Chapter 5 HART Device Configuration
46 Bedrock Secure OSA Remote User Manual - BRDOC020_001 10/11/18
9. If you elected to automatically add a DTM in the previous step, a list of
the DTMs that were found will be displayed after any certificates have
been selected (see Figure 5-8). Use the checkboxes to select the DTM(s)
you would like to add to your project and then do one of the following:
• Click Add All and Close. This will add all compatible DTMs in
the list to your project.
•
Or
click Add Selected Nodes to Project. This will add only
those DTMs with check marks to your project. Click Close to
dismiss the dialog.
Figure 5-8 Adding Gateway DTMs After Scan
10. The Network View pane will be updated with the selected DTM(s) as
shown in Figure 5-9. Select a Bedrock Controller-Local Interconnect
Gateway DTM in the Network View to display a list of gateway DTMs
for SIO-Hart.