IMPORTANT INSTRUCTIONS
USER OPERATING MANUAL – MODEL 1222NA/2222EU
Revision 1.0
P a g e | 12
Thermal Safety
The BedJet VET includes the most robust set of redundant safety features of any forced air
animal warmer unit currently on the market to prevent unintentional overheating. These
features include:
Easily set Auto-shutoff times from 30 minutes to 4 hours
Dual temperature sensors with microprocessor monitoring for error check - sensors are
averaged for temperature readings and must agree with each other or the system will log a
fault and shut down
Unique and patent pending 3-stage microprocessor monitored overheat protection that will
shut down heat under the following out of specification over-temperature situations:
o
Air exhaust measured at > 46°C for 120 seconds
o
Air exhaust measured at > 53°C for 12 seconds
o
Air exhaust measured at > 55°C for 1 second
Mechanical thermostatic overheat switch located in air exhaust that will shut off power to
the heater as redundant safety feature to microprocessor monitoring failure
Specifications
Voltage: 120V for BedJet VET Model 1222NA, 220-240V for BedJet VET Model 2222EU
Power Rating: 1500 watts
Heating Element Rating: 1400 watts
Amp Rating: 12.8 Amps for Model 1222NA, 6.4Amps for Model 2222EU
Air Filter Type: .3µ replaceable
Thermal Sensors: 2, dual redundant with microprocessor error checking
Temperature Regulation Accuracy: ±1.5 °C (as new)
System Time to 38°C: 12 seconds
Dimensions: 16.5” x 12” x 6.5” high (not including hose outlet)
Weight: 9 lbs. not including hose
Hose length: 45” (hose extensions available)
Recommended filter change: 6 months or 400 hours
Remote Control Battery Type: 23A (or A23) alkaline
