Weed brush
Type: BECX OB90M
Version: 1
November 2019
Page 15 of 24
4.2
Using the weed brush
No.
What to do
Action
Result
1
Check the installation
•
Check the following points:
•
Check the rotational speed of the brush
motor. In practice, 50% of the capacity
(30 liters) is sufficient for decent results.
•
Check that the brush motor runs without
vibration and there are no irregular
sounds.
•
If one of the above checks discovers a
deficiency, it must first be rectified before
the weed brush can be used.
2
Drive to the work
area
•
Always switch off the brush motor when it
is not being used.
3
Switch on the brush
motor
•
For detailed instructions, see the tool
holder manual.
•
To prevent damage to the installation, it is
important that the weed brush is gradually
switched on or off using the lowest RPMs.
Once the installation is switched on, the
RPMs can be increased.
Switching on or off
at high RPMs causes
high loads on the
installation.
4
Adjust the brush to
the desired position
•
Use the width setting and the height
setting to achieve the correct brush
position. For detailed instructions, see the
tool holder manual.
•
Check that no one is in the work area.
5
Brushing
•
Drive with the tool holder over the street.
6
Stop in the following
situations!
•
The weed brush and the work activities
must be stopped immediately in the
following situation:
•
People or animals are present in the
work area. The driver must make this
assessment.
•
The weed brush starts making a
different sound or starts to vibrate.
If you do not stop
promptly in the
above situations, it
may lead to serious
injury.
