Becom 150-3078-1, Руководство пользователя

Страница: 9 / 15

© BECOM Systems 2021
User Manual - PoE-Splitter
Last change: 25 March 2021/Version 3
9
|
15
3 Connecting the Device
The following figure shows the interfaces and status LEDs of the device.
Data & PoE IN Data OUT
Power Current Limiter
PoE Class
24V DC OUT
Status LEDs
Figure 3-1: Connectors and LEDs
Connector description:
Connector Description
Data & PoE IN Connect this to your PoE switch or injector with a CAT5e or higher category patch cable.
Data OUT Connect this to your camera with a CAT5e or higher category patch cable or connect it
with the RJ45 plug of your dedicated camera cable from BECOM systems.
24V DC OUT Connect this header to the power supply cable of your camera. Refer to Figure 3-2 for
the pin description or connect it to the dedicated wires of your camera cable from
BECOM Systems using an appropriate mating part.
Mating part suggestion:
691361100002 from Würth Electronics or similar part
Table 3-1: Connector Description
V+ V-
Figure 3-2: Pin description of the camera power supply connector (24V DC OUT)