BECKWITH ELECTRIC M?3311A, Инструкция, Страница: 334 / 450

A–1
Appendix – A
This Appendix contains forms for photocopying,
and recording the configuration and setting of
the M‑3311A Transformer Protection Relay, and
to file the data for future reference. Examples of
the suggested use of these forms are illustrated
in Chapter 4 , System Setup and Setpoints and
Chapter 2 , Operation .
Page A‑2 contains a copy of the Relay Configuration
Table and is herein provided to define and record
the blocking inputs and output configuration for
the relay. For each function, check if DISABLED
or check the output contacts to be operated by the
function. Also check the inputs designated to block
the function operation.
The Communication Record Form reproduces the
Communication and Setup unit menus. This form
records definition of the parameters necessary for
communication with the relay, as well as access
codes, user logo (identifying) lines, date & time
setting, and front panel display operation.
The functional Configuration Record Form
reproduces the Configure Relay menus including
the Setup Relay submenu which is accessible via
S‑3300 IPScom
®
Communication Software or the
optional M‑3931 HMI front panel module.
For each function or setpoint, refer to the
configuration you have defined using the Relay
Configuration Table, and circle whether it should
be enabled or disabled by the output contacts it will
activate, and the inputs that will block its operation.
The Setpoint & Timing Record Form allows
recording of the specific values entered for each
enabled setpoint or function. The form follows the
main menu selections of the relay.
The AS SHIPPED settings are included in brackets
[ ] to illustrate the factory settings of the relay.
A
Configuration Record Forms