M-2910 BlueJay Universal Data Transceiver
–4–
Power
The M-2910 is powered by 5 V dc, supplied by the SPI interface connector. Maximum power draw is 1.75 W
(350 mA).
Power Requirements:
•
Operating Voltage – +5 V dc
&
10%
•
Transmit Current – 350 mA (1.75 W)
•
Receive Current – 350 mA (1.75 W)
•
Idle Current – 200 mA (1.00 W)
•
Sleep Current – 30 mA (0.15 W)
Configuration
The M-2910 is configurable using parameters set into the M-2600A/M-2667A, using SlimCom
®
: The following
parameters can be set:
•
Wireless Source (unit) Address (1–250)
•
Wireless Destination (Transmit) Address (1–255)
•
Wireless Multicast (Receive) Address (251–254)
•
Peer-to-Peer Unit Addresses (1–250)
Configuring the M-2910
To configure the M-2910, the unit must be installed on an M-2600A/M-2667A control, and the control
connected to a PC running SlimCom, using a RS-232 cable. The unit may be configured through the
SlimCom menus
