Beckman Coulter UniCel DxC 600, Инструкция по эксплуатации

Страница: 93 / 498

A13914AF
2-3
Preparing Samples for Analysis
Preparing Samples for Analysis
2
Sample Preparation by Container Type
Table 2.2 shows how to prepare different sample containers.
Table 2.2 Preparation of Sample Containers
If running a sample from a... Then...
Primary Tube • Use the Synchron LX/UniCel DxC Clinical Systems Sample Template to
determine adequate sample volume.
• Remove the cap if not using CTS.
• For CTS systems, remove the cap, if not a validated closed tube.
Secondary Tube • Determine sufficient volume.
• Check for fibrin or other materials resulting from storage.
Beckman Coulter Synchron
Microtube • Place into a 13 × 100 mm rack.
• Pipette the sample into a Synchron Microtube.
• Make sure there are no bubbles at the bottom of the tube.
• A "reserved rack" must be used.
Sample Cup
0.5 mL
(PN 651412)
2.0 mL
(PN 652730 or
81902)
• Place the cup into a 13 × 75 mm, or a 13 × 100 mm rack.
OR
• Place the cup in 15 × 85 mm tube into a 16 × 100 mm rack.
• Make sure there are no bubbles in sample.
• If cup is placed in a 15 × 85 tube with a Bar Coded label, a "reserved rack"
must be used.
BD Microtainer • Place Microtainer in adapter (PN 472987).
(Refer to figure to the right.)
• Make sure there are no bubbles in sample.
• A "reserved rack" must be used.
0.5 mL Cup Insert
(PN 467406) (reusable)
• Place the metal Cup Insert into a 16 × 100 mm rack.
• Insert a 0.5 mL cup into the Cup Insert.
• A "reserved rack" must be used.
E014498L.EPS
0.5 mL 2.0 mL
A01153 8 L.EPS