Rerunning Selected Chemistries
Introduction
IMMAGE 800 Operations Manual A11403
Sample Programming
September 2016
Page 7-67
7
Rerunning Selected Chemistries
Introduction
Through Rerun Chem, one or more chemistries can be selected for all samples which
are to be rerun. The samples will then be programmed for only those selected
chemistries.
Only a chemistry which was selected in the original sample program can be selected in
Rerun Chem. The ability to add a new chemistry is only available through Edit
Samples.
Selecting Chemistries for Rerun
Follow the steps below to select chemistries to be rerun.
Figure 7.21
Rerun Chem Dialog Box
Step
Action
1
Select
Rerun Samples [F6]
from the Program Sample screen and select
samples to be rerun.
(Refer to Rerunning a Sample, Selecting Samples to be Rerun in this
section for more information.)
2
Select
<Rerun Chem>
.
3
Select the chemistry(s) to be rerun. (Refer to Figure 7.21.)
(Refer to Programming a Sample, Selecting Chemistry Tests by Chemistry
in this chapter for more information.)
4
Select
<OK>
to run the chemistry(s).
OR
Select
<Cancel>
to return to the Program Sample screen without
rerunning.
E010268S.EPS
