Beckman Coulter CESI 8000, Руководство по предварительной установке

Страница: 5 / 46

B11953AC v
Safety, Notices and Labels
Overview
A description of the symbols and labels that are used on the Beckman Coulter CESI 8000 High
Performance Separation System, or that are shown in this manual, can be found in this section.
Do not attempt to perform any procedure before carefully reading all instructions. If in doubt as to
how to proceed in any situation, contact your Beckman Coulter Representative.
Beckman Coulter, Inc. urges its customers and employees to comply with all national health and
safety standards such as the use of barrier protection. This may include, but is not limited to,
protective eyewear, gloves, and suitable laboratory attire when operating or maintaining this or
any other automated laboratory instrumentation.
WARNING
If the equipment is used in a manner not specified by Beckman Coulter, Inc., the
protection provided by the equipment may be impaired.
Alerts for Warning, Caution, Important, and Note
All Warnings and Cautions in this document include an exclamation point, framed within a triangle.
The exclamation point symbol is an international symbol which serves as a reminder that all safety
instructions should be read and understood before installation, use, maintenance, and servicing are
attempted.
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury. It may also be used to indicate the possibility of
erroneous data that could result in an incorrect diagnosis. May be used to indicate
the possibility of severe instrument damage.
CAUTION
CAUTION indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury. It may also be used to alert against unsafe
practices. May be used to indicate the possibility of erroneous data that could
result in an incorrect diagnosis.
IMPORTANT
Used for comments that add value to the step or procedure being performed. Following the
advice in the Important adds benefit to the performance of a piece of equipment or to a process.
NOTE
Used to call attention to notable information that should be followed during installation, use, or
servicing of this equipment.