Learning to Create Methods for the Biomek® 3000
2-17
Biomek® 3000 Laboratory Automation Workstation Quick-Start Guide
2.8
Running a Method
Next you will run the method you just created using the simulator. The simulator
allows you to watch the method on your screen without actually running the method
on an instrument.
To run your saved method:
1. If you do not see the
Simulation Display
button on the toolbar (Figure 2-15),
from the
Instrument
menu, choose
Hardware Setup
.
Biomek Hardware
Setup
appears.
Figure 2-15. Hardware Setup
2. In
Port
, select
Simulate
.
3. Choose
Accept
to save changes and close
Hardware Setup
. Biomek Software
is now running in simulation mode.
