Beckhoff PS1111-2402-0002, Документация

Страница: 21 / 31

Technical data, mounting, wiring
PS1111-2402-0002 21 Version: 1.0
3.13 Environment
Environment
Operating temperature
1)
-10°C to +70°C Reduction of the output power according to
Fig.
Output current over ambient temperature
Storage temperature -40°C to +85°C For storage and transport
Output load reduction 0.06A/°C B60°C and +70°C
Load reduction due to
installation altitude
3)
0.15A/1000m or 5°C/1000m Above 2000m, see Fig. Output current over
installation altitude
Moisture 5 to 95% r.h. According to IEC 60068-2-30 Do not
energize if there is condensation.
Atmospheric pressure 110-54kPa see Fig. Output current over installation
altitude
Installation altitude 0 to 5000m Without any restrictions
Overvoltage category II According to IEC 60664-1, for altitudes up to
5000m
Surge voltage strength 4kV (according to overvoltage
category III) According to IEC 60664-1, for altitudes up to
2000m
Degree of pollution 2 According to IEC 60664-1, non-conductive
Oscillation, sinusoidal
2)
2–17.8Hz: ±1.6mm;
17.8-500Hz: 2g 2 hours/axis According to IEC 60068-2-6
Impacts
2)
30g 6ms, 20g 11ms 3 impacts/
direction, 18 impacts in total According to IEC 60068-2-27
LABS-free The device does not release any silicones or other paint-wetting impairment
substances and is suitable for use in paint shops.
Corrosive gas Meets the requirements of ISA-71.04-1985, Severity Level G3, IEC
60068-2-60 Test Ke Method 4 for a service life of at least 10 years in these
environments.
1)
The working temperature is identical to the room temperature or the ambient temperature and is defined as
the air temperature 2cm below the device.
2)
Tested in conjunction with DIN rails according to EN 60715 with a height of 15mm and a thickness of
1.3mm and standard mounting position.
3)
The derating is not hardware-controlled. The user must take this into account in order to stay below the
reduced current limits, so that device overload is avoided.
Fig. 11: Output current over ambient temperature; output current over installation altitude