,1'8675,((/(.7521,.
Eiserstraße 5 / D-33415 Verl / Tel.: +49 (0)5246/963-0 / Fax: -149
2SHUDWLQJ,QVWUXFWLRQV
Modular Industrial Computer MIC3210
5
0,&
0DLQWHQDQFHDQGFDUH
0DLQWHQDQFHIUHH
&OHDQLQJ
6ZLWFKRIIWKH,QGXVWULDO3&
ILUVW
The Industrial PC is maintenance-free.
The front of the Industrial PC can be cleaned with a damp, soft cloth. Do not
use any corrosive cleansing agent, no diluents, no scouring agents and no
hard objects that could cause scratches. The Industrial PC must be switched
off before it is cleaned so as to prevent keys from being activated inadver-
tently.
'LVSRVDO
5HPRYHWKH,QGXVWULDO3&
DQGGLVDVVHPEOHLW
2EVHUYHQDWLRQDOUHJXODWLRQV
IRUGLVSRVLQJRIHOHFWURQLF
ZDVWH
To be disposed of, the device must be removed and completely disassembled.
The metal housing parts can be recycled. Electronic components such as the
display, drives and circuit boards must be disposed of in accordance with na-
tional regulations for disposing of electronic waste.
0DOIXQFWLRQV
0DOIXQFWLRQ
&DXVH
$FWLRQV
Industrial PC does not function
after it has been started
No power supply
1. Check fuse
2. Measure mains voltage,
check connector pinning
3. Call Beckhoff Service
The Industrial PC does not boot
completely
A disk is in the drive
The hard disk is damaged (e.g. if the
PC is switched off while software is
running)
Setup settings are incorrect
Other causes
Remove the disk and
press any key
1. Boot with boot diskette
2. Start from SCANDISK
Check setup settings
Call Beckhoff Service
The systems boots, the software
starts, but the control system does
not function faultlessly
The cause of the error is in the soft-
ware or installation parts outside the
Industrial PC
Call the machine or software
manufacturers.
Error in accessing disks
Faulty disks
Faulty drive
Check the disk in another PC
Call Beckhoff Service
The Industrial PC only functions par-
tially or temporarily
e.g. no screen display, but the disk
drive responds when the PC is
switched on
Components in the PC are faulty
Call Beckhoff Service
