manualshive.com logo in svg

Beckhoff KL6581, Документация, Страница: 25 / 41

Поделиться
Скачать
Beckhoff KL6581 Скачать руководство пользователя страница 25

EnOcean

KL6581 and KL6583

25

Version: 2.0.0

4

EnOcean

4.1

EnOcean - overview

Technology

The EnOcean radio technology makes a far-reaching signal with low quantities of ambient energy possible.
With 50 µWs, a standard EnOcean radio module can easily transmit a signal over a distance of 300 m (in the
free field). The signal period for an EnOcean telegram is approx. 1 thousandth of second.

• License-free 868 MHz frequency band with 1% duty cycle

• Multiple telegram transmission with checksum

• Short telegrams (approx. 1 ms) lead to a small probability of collision

• Long range: 30 m inside buildings or 300 m in the free field

• Repeater available for extensions

• Unidirectional and bidirectional communication

• High data transmission rates of 125 kbit/s

• Low ‘data overhead’

• ASK modulation

• Radio protocol is defined and integrated in modules

• Sensor profiles specified and adhered to by users

• Unique transmission ID (32-bit)

• No interference with DECT, WLAN, PMR systems etc.

• System design verified in industrial environment

Protocol structure

Protocol

Description

Length

ORG

Telegram type

1 Byte

DB_3

Data byte 3

1 Byte

DB_2

Data byte 2

1 Byte

DB_1

Data byte 1

1 Byte

DB_0

Data byte 0

1 Byte

ID_3

Transmitter ID byte 3

1 Byte

ID_2

Transmitter ID byte 2

1 Byte

ID_1

Transmitter ID byte 1

1 Byte

ID_0

Transmitter ID byte 0

1 Byte

STATUS

Information status

1 Byte

Содержание KL6581










































Отзывы:

Нет отзывов