Beckhoff KL2535, Документация, Страница: 8 / 49

Product overview
2.2 KL2535 - Technical Data
Technical data KL2535/KS2535
Number of output stages 2
Load type ohmic/inductive > 1 mH
Supply for the output stage 24 V
DC
via power contacts
Output current per channel 1 A (short-circuit-proof, common thermal overload
warning for both output stages)
PWM clock frequency 36 kHz
Resolution max. 12 bit
Number of digital inputs 2 digital inputs (24 V)
Nominal voltage of the inputs 24 V
DC
(-15%/+20%)
Signal voltage “0” -3 V... 2 V
Signal voltage “1” 15 V... 30 V
Input filter 0.2 ms
Input current typically 5 mA
Electrical isolation 500 V (K-bus/mains voltage)
Supply voltage for internal E-bus circuit via the K-bus
Current consumption from K-bus typically: 60 mA
Current consumption from the power contacts typically: 10 mA
Bit width in the input process image 2 x 16 bit data, 2 x 8 bit status
Bit width in the output process image 2 x 16 bit data, 2 x 8 bit control
Configuration via the Bus Coupler or the controller
Weight approx. 55 g
Permissible ambient temperature range during
operation 0°C ... + 55°C
Permissible ambient temperature range during
storage -25°C ... + 85°C
Permissible relative humidity 95%, no condensation
Dimensions (W x H x D) approx. 15 mm x 100 mm x 70 mm (width aligned: 12
mm)
Mounting [
}
18]
on 35 mm mounting rail conforms to EN 60715
Vibration/shock resistance conforms to EN 60068-2-6 / EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2 / EN 61000-6-4
Protection class IP20
Correct installation position
see section Installation position [ } 20]
Approval CE
KL2535, KL2545 8 Version: 2.0.0