Beckhoff KL2535, Документация, Страница: 11 / 49

Product overview
2.5 KL2545 - Technical Data
Technical data KL2545/KS2545
Number of output stages 2
Load type ohmic/inductive > 1 mH
Supply for the output stage 8 V
DC
to 50 V
DC
, via terminal locations
Output current per channel 3.5 A (short-circuit-proof, common thermal overload
warning for both output stages)
PWM clock frequency 36 kHz
Resolution max. 12 bit
Number of digital inputs 2 (for end positions)
Rated voltage of the digital inputs 24 V
DC
(-15%/+20%)
Signal voltage “0” at digital inputs -3 V ... 2 V
Signal voltage “1” at digital inputs 15 V ... 30 V
Input filter 0.2 ms
Input current typically 5 mA
Number of encoder inputs 4 (for an encoder system)
Encoder voltage "0" -3 V ... 1.5 V
Encoder voltage "1" 2.5 V ... 24 V
Electrical isolation 500 V (K-bus/mains voltage)
Supply voltage for internal E-bus circuit via the K-bus
Current consumption from K-bus typically: 100 mA
Current consumption from the power contacts typically: 20 mA
Power loss typically: 4 W
Bit width in the input process image 2 x 16 bit data, 2 x 8 bit status
Bit width in the output process image 2 x 16 bit data, 2 x 8 bit control
Configuration via the Bus Coupler or the controller
Weight approx. 100 g
Permissible ambient temperature range during
operation 0°C ... + 55°C
Permissible ambient temperature range during
storage -25°C ... + 85°C
Permissible relative humidity 95%, no condensation
Dimensions (W x H x D) approx. 27 mm x 100 mm x 70 mm (width aligned: 24
mm)
Mounting [
}
18]
on 35 mm mounting rail conforms to EN 60715
Vibration/shock resistance conforms to EN 60068-2-6 / EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2 / EN 61000-6-4
Protection class IP20
Correct installation position
see section Installation position [
}
20]
Approval CE
KL2535, KL2545 11 Version: 2.0.0