Beckhoff EJ5002, Руководство пользователя

Страница: 18 / 48

EJ5002 - Product description
EJ5002 18 Version: 1.4
3.2 Technical Data
Technical data EJ5002
Encoder connection Binary input: D+, D-; Binary output: Cl+, Cl-
Supply of power to the internal SSI electronics 24 V
DC
via the power supply of the field side
Current consumption from Up contacts (without
encoder) typically 20 mA (without encoder)
Current consumption via E-bus typ. 120 mA
Data transfer rate adjustable up to 1 MHz (250 kHz preset)
Serial input 24-bit width (adjustable, max 32-bit)
Data direction Read
Distributed Clocks yes
Signal output Differential signal (RS422)
Signal input Differential signal (RS422)
Electrical isolation 500 V (E-bus/field voltage)
Configuration via TwinCAT System Manager
Permissible ambient temperature range during
operation -25°C .. +60°C (extended temperature range)
Permissible ambient temperature range during storage -40 °C .. +85 °C
Permissible relative air humidity 95 %, no condensation
Operating altitude max. 2,000 m
Dimensions (W x H x D) approx. 12 mm x 66 mm x 55 mm
Weight approx. 30 g
Mounting on signal distribution board
Pollution degree 2
Mounting position
Standard [
}
26]
Position of the coding pins [ } 29]
2 and 5
Color coding grey
Vibration / shock resistance conforms to EN 60068-2-6 /EN 60068-2-27 (with
corresponding signal distribution board)
EMC immunity / emission conforms to EN 61000-6-2 /EN 61000-6-4 (with
corresponding signal distribution board)
Protection class EJ module: IP20
EJ system: dependent on the signal distribution
board and housing
Approvals / markings CE, EAC, UKCA,
UL
CE approval
The CE Marking refers to the EtherCAT plug-in module mentioned above.
If the EtherCAT plug-in module is used in the production of a ready-to-use end product (PCB in con-
junction with a housing), the manufacturer of the end product must check compliance of the overall
system with relevant directives and CE certification.
To operate the EtherCAT plug-in modules, they must be installed in a housing.