Beckhoff CX50 0 Series, Техническая документация

Страница: 54 / 77

Notes on the documentation
52 CX50x0 - Hardware Documentation
Advanced Chipset Features
This menu is used for memory functions settings. Such settings should be implemented cautiously since they can
affect the stability of the whole system.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced Chipset Features
DRAM Timing Selectable [by SPD] Item Help
System BIOS Cachable [Enabled]
Video BIOS Cachable [Disabled]
** On-Chip VGA Setting **
On-Chip Video Memory Size [128 MB]
On-Chip Frame Buffer Size [8 MB]
Current Configuration DVO
Boot Type DVI
↑ ↓ → ← :Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
DRAM Timing Selectable
This submenu can be used for setting the optimum timing for options, depending on the memory modules used. By
default the options are configured via 'By SPD', by reading the content of the SPD (Serial Presence Detect ) unit.
During this process critical parameter information relating to memory type, size, speed, voltage interface and module
banks are stored in the EEPROM.
System BIOS Cachable
If the function is active the cache memory makes use of the available BIOS-ROM, thereby enhancing the
performance, although this applies mainly to DOS and Win3.x. Under Windows 95/98 this option is less relevant.
Video BIOS Cachable
If this option is enabled, the cache memory can take the VIDEO BIOS of the graphics card at the address C0000h to
C7FFFh into account. Please note that caching involves risks, if the cache contains the code and a program wants to
write into the BIOS area. If this option is enabled, the option Video BIOS Shadow should also be activated. Under
DOS the speed benefits is around 40%. Under Win.x and DOS this option should be enabled, otherwise it should be
disabled.
On-Chip Video Memory Size
This option can be used to set the size of the video memory. (128 MB, 256 MB)
On-Chip Frame Buffer Size
This option can be used to adapt the frame buffer. Various setting options are available. The individual options can
be used to try and enhance the performance. Make sure the system stability is not affected and proceed step-by-step
(1 MB, 4 MB, 8 MB)
Current Configuration
The current graphics configuration is shown here. In this device it is set to DVO.
Boot Type
This setting indicates the output source for the boot process. Since the CX50x0 devices support graphic outputs only
via DVI-I, this setting is always set to DVI.