manualshive.com logo in svg

Beckhoff CX2550-0020, Руководство пользователя

Поделиться
Скачать
Beckhoff CX2550-0020 Скачать руководство пользователя страница 40

Appendix

CX2550-0020

40

Version: 1.1

8

Appendix

8.1

Accessories

HDD and SDD storage media

Order number

Description

CX2900-0401

Hard disk, SATA, 2½ inch, 1 TB

CX2900-0501

Solid-state disk SSD, SATA, MLC flash, 2½ inch, 128 GB

larger capacities on enquiry

Housing bar clips

Order number

Description

CX2900-0101

Housing bar clips (black) for CX20x0 series
10 bar clips, each with two clips

CX2900-0105

Cover for solid-state disk SSD and hard disk

CX2900-0106

Installation frame

8.2

Certifications

All products of the Embedded PC family are CE, UL and EAC certified. Since the product family is
continuously developed further, we are unable to provide a full listing here. The current list of certified
products can be found at 

www.beckhoff.com

.

FCC Approvals for the United States of America

FCC: Federal Communications Commission Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.

FCC Approval for Canada

FCC: Canadian Notice

This equipment does not exceed the Class A limits for radiated emissions as described in the Radio
Interference Regulations of the Canadian Department of Communications.

Содержание CX2550-0020










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды