manualshive.com logo in svg

Beckhoff CX20 0 Series, Руководство пользователя

Поделиться
Скачать
Beckhoff CX20 0 Series Скачать руководство пользователя страница 57

Configuration

CX20x0

57

Version: 2.5

Enter the user name and password for the CX in the 

User Name

 and 

Password 

fields and click 

OK

.

The following information is set as standard in CX devices:

User name:

 Administrator 

Password:

 1

6. If you do not wish to search for any further devices, click on 

Close 

to close the Add Route Dialog.

The new device is displayed in the Choose Target System window.

7. Select the device you want to specify as target system and click 

OK

.

ð

You have successfully searched for a device in TwinCAT and inserted the device as the target system.
The new target system and the host name are displayed in the menu bar.

Using this procedure you can search for all available devices and also switch between the target systems
at any time. Next, you can append the device to the tree view in TwinCAT.

Содержание CX20 0 Series





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды