Beckhoff CU8803-0000, Инструкция по установке и эксплуатации

Страница: 9 / 19

Product Description
2.2.3 DVI Input (X20)
X20
Connector DVI-D 3x8pole Digital LP-mount.
The CP-Link 4 transmitter box CU8803-0000 is connected with the Industrial PC via the DVI input ( X20 ).
The maximum cable length is 1 m.
Pin Signal Pin Signal
1 TMDS Data 2- 13 n.c.
2 TMDS Data 2+ 14 + 5 V Power Supply
3 TMDS Data2/4 shield 15 GND ( +5 V, Analog H/V Sync)
4 n.c. 16 Hot Plug Detect
5 n.c. 17 TMDS Data 0 -
6 DDC Clock 18 TMDS Data 0 +
7 DDC Data 19 TMDS Data 0/5 shield
8 Analog Vertical Sync 20 n.c.
9 TMDS Data 1 - 21 n.c.
10 TMDS Data 1 + 22 TMDS Clock shield
11 TMDS Data1/3 shield 23 TMDS Clock +
12 n.c. 24 TMDS Clock -
2.2.4 CP-Link 4 Output (X30)
X30
BA 1x8pole RJ45 Invers shield 2XLWL Lp-mount. Molex Nr: 43860-0016 Modular Jack
The CP-Link 4 transmitter box CU8803-0000 is connected with the Control Panel via the
CP-Link 4 output (
X30 ).
Pin Signal Pin Signal
1 CP-Link4_0P 5 CP-Link4_2N
2 CP-Link4_0N 6 CP-Link4_1N
3 CP-Link4_1P 7 CP-Link4_3P
4 CP-Link4_2P 8 CP-Link4_3N
CU8803-0000 disconnect power supply
Attention
If using the CP-Link 4 - One Cable Display Link, the 24 V power supply of the CP-Link 4
transmitter box must be switched off before disconnecting the CP-Link 4 output
connection.
CU8803-0000 7