Beckhoff CPX27 0010 Series, Инструкция по установке и эксплуатации

Страница: 13 / 39

For your safety
CPX27xx-0010 13 Version: 0.2
2.4 Staff qualification
All operations involving Beckhoff software and hardware may only be carried out by qualified personnel with
knowledge of control and automation engineering. The qualified personnel must have knowledge of the
administration of the Panel PC and the associated network.
All interventions must be carried out with knowledge of control programming, and the qualified personnel
must be familiar with the current standards and guidelines for the automation environment.
2.5 Operator's responsibility
The operator must ensure that:
• the product is only used as intended (see chapter: Intended use [ } 8] ).
• the product is in a sound condition and in working order during operation.
• the product is operated, maintained and repaired only by qualified and authorized personnel.
• the personnel is instructed regularly about relevant safety aspects, and is familiar with the operating
manual and in particular the safety instructions contained herein.
• the operation manual is in good condition and complete, and always available for reference at the
location of the product.
National regulations
Depending on the type of machine and plant in which the Panel PC is used, national regulations governing
the controllers of such machines will apply, and must be observed by the operator. These regulations cover,
amongst other things, the intervals between inspections of the controller. The operator must initiate such
inspections in good time.
Procedure in the event of a fault
In the event of faults at the Panel PC, the list in the section Troubleshooting [ } 29] can be used to
determine the measures to be taken.
Operator requirements
Anyone who uses the Panel PC must have read these operating instructions and must be familiar with all the
functions of the software installed on the Industrial PC to which he has access.