Beckhoff CP79 Series, Инструкция по установке и эксплуатации

Страница: 15 / 18

Operating Instructions
Servicing and maintenance
Please also refer to chapter Foreword .
Cleaning the Control Panel
Switch off the Industrial PC
Attention
Switch off the Industrial PC and all devices connected to it, so that keys
cannot be unintentionally actuated.
The front of the Control Panel can be cleaned with a soft, damp cleaning
cloth. Do not use any aggressive cleaning materials, thinners, scouring
material or hard objects that could cause scratches.
Servicing
The Control Panel requires no maintenance.
Do not open the housing of the Control Panel!
Note
For technical support contact Beckhoff Service .
Emergency procedures
In case of fire, the Control Panel should be extinguished with powder or
nitrogen.
Shutting down
Disposal
Dismantle the Control
Panel
Observe national
electronics scrap
regulations The device must be fully dismantled in order to dispose of it. The housing
can be sent for metal recycling.
Electronic parts such as lamps and circuit boards must be disposed of in
accordance with national electronics scrap regulations.
14 CP79xx