Beckhoff CP32 -2 -0020 Series, Руководство пользователя

Страница: 24 / 45

Commissioning
CP32xx-2xxx-0020 24 Version: 1.1
4.3.2 Connecting cables and power supply
NOTE
Incorrect connection procedure
Incorrect procedure when connecting the cables and the power supply can cause hardware damage.
• Follow the documented procedure for connecting the cables and the power supply.
• Always connect the cables first and only then switch on the power supply.
• Please read the documentation for the external devices prior to connecting them.
If you mount the Panel PC on the C9900-M803 (2) or C9900-M804 (3) mounting arm, the wiring of the power
supply and Ethernet passes through the mounting arms. At the foot of the support arms is the Harting HAN
connection socket with the Harting HAN plug. From there, the voltage cables and Ethernet cables are fed
through the mounting arms upwards to the opening (see Figure 17). Plug the plugs protruding out of the
mounting arm into the PC.
2
3
Fig. 17: CP32xx_wiring
If you mount the Panel PC on the C9900-M802 (1) or C9900-M805 (3) mounting arm, an adapter cable (15
cm) from Harting push-pull to a HAN adapter piece is available for voltage transmission. You have to lay the
Ethernet cables in place yourself. A push-pull plug for the Ethernet cable for field assembly is included in the
scope of delivery.
Connecting cables
The connections are located at the bottom of the back of the housing and are documented in Chapter 3.1
Structure [ } 9] .
Make sure that you first ground the PC (see chapter 4.3.1 Grounding the Panel PC [
}
22] ) and then plug in all
data transmission lines.