Beckhoff C6025, Руководство пользователя

Страница: 18 / 45

Commissioning
C6025 18 Version: 1.8
4.2 Installation in the control cabinet
The C6025 Industrial PC is designed for installation in control cabinets in machine and plant technology.
Please observe the environmental conditions prescribed for the operation (see Chapter 9
Technical data
[
}
39] ).
Using different mounting plates, you can align the cable entry based on the application requirements.
Figure 8 shows the three available mounting plates: the standard mounting plate 1, the optional mounting
plate 2 and the optional mounting plate 3 with DIN rail adapter. The three mounting plates are mounted on
the device as follows:
• Mounting plate 1: at the rear of the Industrial PC with three Torx TX10 screws and a tightening torque
of approx. 0.5 Nm
• Mounting plate 2: on the right-hand side wall of the Industrial PC with four Torx TX10 screws and a
tightening torque of approx. 0.5 Nm
• Mounting plate 3: at the rear of the Industrial PC with two Torx TX10 screws and a tightening torque of
approx. 0.5 Nm
Mounting plate 2 offers two mounting options (see Chapter 4.2.1 Mounting options [
}
19] ).
3
1 2
Fig. 8: C6025 _Mounting plates
In the basic configuration, the Industrial PC is delivered with a standard mounting plate 1 already mounted
as shown in fig. 8. The scope of delivery does not include any further mounting plates. You can choose the
following ordering options:
Table 12: Mounting plate ordering options
Order designation Execution
C9900-M682 Mounting plate for C602x on the side wall, instead of
the standard mounting plate
C9900-M683 Mounting plate for side mounting of the C602x, single
part, not mounted
C9900-M684 Mounting plate with DIN rail adapter for C602x,
instead of the standard mounting plate
C9900-M685 Mounting plate with DIN rail adapter for C602x, single
part, not mounted