Product Description
C5210
11
2.5.2 24V
DC
Power Supply
Rear view C5210
with 24V
DC
power supply
2.6 Interfaces
Interfaces to the
slide-in Industrial PC
2.6.1 Serial interface (X102)
The Industrial PC has one serial interface COM1 (
X102
), using the type RS232, which is brought to a
9 pin SUB-D plug connector.
2.6.2 DVI (Digital Visual Interface) (X103)
The DVI connection (
X103
) is used for transferring the video signal.
2.6.3 USB Interfaces (X104
– X107)
The four USB interfaces (
X104
– X107
) are used for connecting peripheral devices with USB connection.
USB2.0 standard
is supported.
2.6.4 Network connections (X108, X109)
The RJ-45 connectors (
X108
) and (
X109
) allow the PC to be connected to a 10/100/1000 BASE-T Local
Area Network (LAN).
2.6.5 Additional plug-in cards (optional)
There is a type plate on the top of the Industrial PC which provides information about the hardware
configuration of the Industrial PC at the time it was supplied.
2.6.6 Earthing measures
Earthing connections dissipate interference from external power supply cables, signal cables or cables to
peripheral equipment.
Establish a low-impedance connection from the earthing point on the PC housing to the central earthing
point on the control cabinet wall, in which the computer is being installed. The earthing connection is
located right hand at the rear side of the Industrial PC when looking from behind.
interfaces
PCIe module slots
battery
power supply
optional fieldbus
X102
X109
X108
X106
X107
X103
X104
X105
Содержание C5210
Страница 2: ......
