Beckhoff AMI8100, Руководство по эксплуатации

Страница: 52 / 61

Maintenance and cleaning
52 ─── Version: 1.0 AMI8100
WARNING
Ensure safe condition for cleaning work
Basically, electronic devices are not fail-safe. The condition is al-
ways safe when the unit is switched off and not energized. For
cleaning work, place the connected servo drives and the machine
in a safe state.
Carrying cleaning work during operation can lead to serious or fa-
tal injuries.
Do not immerse or spray the servo drive
Wipe off the servo drive only with a cleaning agent and a cloth.
Due to impermissible solutions, cleaning by immersion can lead to
damage to the surface and the servo drive as well as to leak-tight-
ness problems.
Contamination, dust or chips can have a negative effect on the func-
tion of the components. In the worst case, contamination can lead to
failure. Therefore, clean and service the components at regular in-
tervals.
11.1
Cleaning materials
Carefully clean the components with a damp cloth or brush.
Use grease-dissolving and non-aggressive cleaning agents such as
isopropanol for cleaning. You will also receive information about
non-approved cleaning agents.
11.1.1
Not applicable
Cleaning agents Chemical formula
Aniline hydrochloride C
6
H
5
NH
2
HCI
Bromine Br
2
Sodium hypochlorite; bleaching
solution NaCIO
Mercury (II) chloride HgCl
2
Hydrochloric acid HCI