Beckhoff AMI8100, Руководство по эксплуатации

Страница: 36 / 61

Technical description
36 ─── Version: 1.0 AMI8100
7.3
Protection equipment
The temperature sensor LPTC-600 is installed in all servo drives of
the AMI812x series.
The LPTC-600 is integrated into the monitoring system of the servo
drive when using the pre-assembled cable. Configure the servo
drive according to the temperature warning at 120 °C and the
switch-off temperature at 140 °C.
The LPTC-600 is identical to the KTY 84,130 used previously.
7.3.1
LPTC-600 sensor
The following table shows the resistance values of the temperature
sensor:
Temperature
[°C]
T/°C [%/K] LPTC-600
Resistance [Ω]
Temperature er-
ror [K]
minimum Nominal value maximum
-40 0.84 340 359 379 ± 6.48
-30 0.83 370 391 411 ± 6.36
-20 0.82 403 424 446 ± 6.26
-10 0.80 437 460 483 ± 6.16
0 0.79 474 498 522 ± 6.07
10 0.77 514 538 563 ± 5.98
20 0.75 555 581 607 ± 5.89
25 0.74 577 603 629 ± 5.84
30 0.73 599 626 652 ± 5.79
40 0.71 645 672 700 ± 5.69
50 0.70 694 722 750 ± 5.59
60 0.68 744 773 801 ± 5.47
70 0.66 797 826 855 ± 5.34
80 0.64 852 882 912 ± 5.21
90 0.63 910 940 970 ± 5.06
100 0.61 970 1000 1030 ± 4.90
110 0.60 1029 1062 1096 ± 5.31
120 0.58 1089 1127 1164 ± 5.73
130 0.57 1152 1194 1235 ± 6.17
140 0.55 1216 1262 1309 ± 6.63
150 0.54 1282 1334 1385 ± 7.10
160 0.53 1350 1407 1463 ± 7.59
170 0.52 1420 1482 1544 ± 8.10
180 0.51 1492 1560 1628 ± 8.62