Installation Instructions
Microsoft Windows 2000
-
Select the folder \DirectX\DirectX9.0c W2000
-
Run DXSetup.exe in the selected directory
-
Restart the PC after the installation has been finished
-
Select the folder \Graphic\Graphiccard\Radeon9250
(1024-RC13-x5-SA)\W2000_XP\Driver
-
Run Setup.exe in the selected directory
-
The driver will be installed now
-
Restart the PC after the installation has been finished
-
Select the folder \Graphic\Graphiccard\Radeon9250
(1024-RC13-x5-SA)\W2000_XP\CPanel
-
Run Setup.exe in the selected directory
-
Setup will ask you to create an icon for ATI Catalyst on the Desktop
-
Select No
-
Restart the PC after the installation has been finished
-
After restarting the system move to Settings\Control
Panel\Display\Settings\Advanced
-
Select the Troubleshooting tab, as you can see in the picture below
and move the slider to the third position from the left
Æ
All
DirectDraw-, Direct3D-, Cursor- and Drawing Accelerations
disabled
-
Apply changes
-
Restart the PC
-
If you exchange this card against a card of the same type, it may be
necessary to reboot twice before installation is successfully finished
4
Graphic driver installation