Operation
Becker Avionics
Frequency Selection Modes
48
RCU6512
DV17551.03 Issue 03 June 2020
3.5 Frequency Selection Modes
Available modes:
•
Standard mode
•
Direct tune mode
•
Channel mode
Standard Mode
Direct Tune Mode
Channel Mode
The modes "Standard Mode", "Direct Tune Mode" and "Channel Mode" have different layouts for the
selection of the operating frequency.
•
The modes are selectable with a short push of the "MDE" key, one after the other.
o
The display shows one by one: "Standard Mode", "Direct Tune Mode" "Channel
Mode", "Standard Mode", and so on.
•
With the changes from "Standard Mode" to "Direct Tune Mode" the active frequency stays
the same.
•
With the change from "Direct Tune Mode" to "Channel Mode" the before selected memory
channel is selected.
•
With the change from " Channel Mode" to "Standard Mode" the before active and preset
channels are selected.
127.000
118.005
SQL
118.005
01
ch
127.000
