Becker P3/30PSF, Руководство по сборке и эксплуатации, Страница: 5 / 16

5
Mounting and installation instructions
Intended Use
1
The tubular drives P3/30PSF to P9/16PSF are designed for operating awnings, screens and winter garden shades only. Linked
operation is only possible if all sub systems run exactly synchronously and reach the top end limit at the same time.
Other applications, utilisation and modifications are not permitted in order to protect the safety of the users and others, since
these actions can impair the system’s safety, resulting in personal injuries and property damage. Becker-Antriebe shall not
accept liability for damages arising from such actions. Always observe the information in these instructions when operating or
repairing the system. Becker-Antriebe shall not accept liability for damages resulting from incorrect usage.
Installing the tubular drive
Caution!
All electrical connections must be made by a qualified elec-
trician. The current supply must be disconnected before in-
stallation. These installation instructions must be given to
the electrician installing the equipment. Ensure that no dam-
age occurs to the antenna insulation. The antenna carries
electric potential.
When installing the drive, the following steps must be carried out:
Attention
Drives from Becker Antriebe are to be mounted and operated
solely with mechanical accessory components shown in the
current Becker product catalogue.
1) Installing a drive adaptor with safety catch:
The insert direction of the drive adaptor safety catch is prescribed by its
shape. When installing the drive adaptor, always ensure that the safety catch
engages. A „clicking“ sound can be heard when the drive adaptor safety
catch engages properly. Pull on the drive adaptor to check that it is located
securely (Fig. 1).
2) Before inserting the drive into the tube, measure the dimensions from the
end of the tube to the centre of the drive adaptor and mark the dimensions on
the tube (Fig. 2).
3) Tubes with shaped sections:
With some drive adaptors, groove widths tolerances in different barrels can
be compensated for by turning the drive adaptor into another groove recess.
These groove recesses have different dimensions and allow you to install the
drive so that it fits exactly (Fig. 3).
Drive adapter safety catch
2
3
A
B
C
B