Change of mode
To change the mode, press the
MDE
key.
q
Frequency preselection mode
Select the mode using the
MDE
key. The last indicated active and pre-
set frequency are shown in the left and right indication respectively.
The preset frequency (right indication) is set using the
MHz
and
kHz
fre-
quency selector switches. Pressing the
<->
exchange key changes over
between the active and preset frequency.
NOTE
The navigation receiver is always ready to receive on the fre-
quency shown in the left indication.
Change of mode
To change the mode, press the
MDE
key.
BECKER NR 3320 - ( ) / NR 3330 - ( )
Page 20
Issue 12/97
LCD (liquid crystal display) elements
Symbol
Description
Function
9
(left indication)
(active frequency)
Indication of active
reception frequency.
1
0
(right indication)
Indication of preset
reception frequency in the
frequency
preselection
mode.
1
0
(right indication)
CH indication steady:
Indicates the storage
channel.
1
0
(right indication)
CH indication flashes:
If the initiated storage
operation is not completed
by pressing the store key.
1
0
(right indication)
ON indication.
1
0
(right indication)
OFF indication.
Rear of unit
BNC
50 Ohm antenna connecting sockets
VOR/LOC-Receiver
TNC
50 Ohm antenna connecting sockets GS-Receiver
Operating Instructions
Issue 12/97
Page 13
