background image

General

The control unit, delivered ex works, controls a DC tubular drive automatically
or via external drive commands. The control unit offers the opportunity of
automatically raising the shading solution in the event of power failure, due to
a fire, for example.

Explanation of pictograms

CAUTION

CAUTION indicates a hazardous situation
which, if not avoided, could result in in-
jury.

ATTENTION

ATTENTION indicates measures that must
be taken to avoid damage to property.

Denotes user tips and other useful in-
formation.

Warranty

Structural modifications and incorrect installation which are not in accordance
with these and our other instructions can result in serious injuries, e.g., crush-
ing of limbs. Therefore, structural modifications may only be carried out with
our prior approval and strictly in accordance with our instructions, particularly
the information contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their inten-
ded use is not permitted.
The end product manufacturer and fitter have to ensure that all the relevant
current statutory, official and, in particular, EMC regulations are adhered to
during utilisation of our products, especially with regard to end product manu-
facture, installation and customer advice.

3 - en

Содержание HazzardControl HC520





















Отзывы: