Quick Start Guide
Portable VHF Stations GK61X
0646.921-071 Issue 03 08/2015
We reserve the right to make technical changes. The data correspond to the current status at the time of printing.
Figure: Rear view GK61X
Figure: Wiring Diagram Connector P2
Start-Up
•
Connect the antenna and the mike/speaker to the corresponding jacks
•
Turn "ON" the device by turning the volume knob clockwise.
•
During PBIT (Power-On Built In Test) the display indicates the message "WAIT", the
software version of "Control Head" (CH) and the software version of "Chassis
Module" (CM).
•
If the PBIT has detected error(s),"FAILURE" appears on the display.
For Operation, see
"Quick Start Guide VHF Transceiver Family 620X"
.
Technical Data GK61X
DC Supply voltage
10...32 V
Nominal supply voltage
12 V / 24 V
Fuse
2 A (GK61X-XX), 7 A (AR620X-XXX/GT6201-XX)
Mike/Headphone
Dyn. Mike 2...10 mV, Headphone 40 mW / 300
Ω
Antenna impedance
50
Ω
Battery capacity
2 Ah / 12 V (GK615-XX), 2x 2 Ah / 12 V (GK616-XX)
Storage
The batteries have a self-discharge of approx. 1% per day. We
recommend to recharge the batteries every 3 month of storage.
Use delivered power cable.
