Becker E16-V1, Руководство по сборке и эксплуатации

Страница: 18 / 24

Technical data dia. 45
Tubular drive R8-17 R12-17 R20-17 R30-17 R40-17
Model E16-V1
Type C SEO I3
Rated torque [Nm] 8 12 20 30 40
Output speed [rpm] 17 17 17 17 17
Limit switch range 64 revolutions
Supply voltage 230 V AC / 50 Hz
Connected load [W] 100 110 160 205 260
Rated current consumption [A] 0.45 0.50 0.75 0.90 1.15
Operating mode S2 4 min
Degree of protection IP 44
Min. tube inside diameter [mm] 47
Emission sound pressure level
[dB(A)] ≤ 70
What to do if...?
Problem Remedy
Tubular drive overruns the limit position or does not reach the
set limit position. Check electrical installation; remove external devices; reset
limit positions.
Due to long cable, L1 and N connection have been reversed.
Change around L1 and N (N = blue, L1 = black/brown); reset
limit positions.
Repair system; delete limit positions, then re-program limit po-
sitions.
Tubular drive stops arbitrarily; cannot be restarted in the same
direction. Use a more powerful tubular drive.
Ensure that the sun protection system runs smoothly.
Delete limit positions, then re-program limit positions.
Tubular drive does not run in the right direction. Tubular drive is overheated. The tubular drive is operational
again after a few minutes.
Clear and remove the obstruction and set the drive in the direc-
tion required.
Check the electrical connection.
Repair electrical installation and re-program limit positions.
Tubular drive only runs for approx. 1 second. Tubular drive is faulty. Replace the tubular drive.
18