Restoring the factory settings for the radio
programming
When resetting the radio programming, all programmed
transmitters and installation data for CentronicPLUS,
Centronic and the sensors will be deleted. Settings required
for the particular operating mode will remain in place.
Press the programming button until the adjacent
LED starts to flash red and then lights up green.
Release the button as soon as the LED lights up
green.
►
The radio programming has been reset and
the radio receiver switches to programming
mode.
Disposal
The crossed-out bin symbol on the product indicates that the device is subject
to mandatory disposal separate from household waste. This product must be
handed over to a collection point for electrical and electronic equipment at the
end of its service life.
The packaging material must be disposed of properly.
45 - en
