Becker BT45-BKR, Быстрый старт

Страница: 5 / 11

Fig. 12
Module
7. User visor clip to secure microphone (See Fig. 13 ) to visor.
8. Route microphone plug down side pillar, under dash and into radio
cavity as seen in
Fig. 14
9. Connect microphone plug to module “MIC” input (See Fig. 12 )
Fig. 13
microphone
Fig. 14
10. Connect installation harness 6-pin plug to module “Radio/Power” port
(See Fig. 15 and 16 )
Fig. 15 Fig. 16
11. Twist remote control battery cover (bottom) and open to remove
clear protective film from battery. Close cap.
12. Secure remote-control (See Fig. 17 ) to location of choice using
included double side tape. Avoid placing in direct sunlight (dashboard
etc.)
Fig. 17
remote control
13. Secure any extra wires and proceed to “ Initial radio setup ”.