Becker BDP-90, Руководство пользователя, Страница: 19 / 29

18
EFFECT
REVERB

REVERB ON/OFF
The reverb effect is open by default, and the indicator light is on.
You can press the
REVERB button to exit reverb effect, and indicator turns off.

REVERB LEVEL SELECTION
Press the REVERB button with the indicator light on
，
the screen displays the level of
reverb, you can change the level value with +/- buttons and press +/- buttons at the same
time to recover the default value 6.
CHORUS

CHORUS ON/OFF
The chorus effect is closed by default, and the indicator is off. Press the CHORUS button
to open chorus effect with the indicator light on.

CHORUS LEVEL SELECTION
Press the CHORUS button with the indicator light on
，
the screen displays the level of
chorus, you can change the level value with +/- buttons and press +/- buttons at the same
time to recover the default value 3.
TRANSPOSE
This piano has TRANSPOSE for playing different music mode easily. With TRANSPOSE ,
you can sharp or flat the key with range -6--5.
Press the TRANSPOSE button with the indicator light on
，
the screen displays the value
of transpose, you can change it with +/- buttons.
When the transpose value on the screen is not “0”, the transpose is on with the indicator
flashing. If you need to exit the transpose mode, you can press +/- buttons until the value
on the screen is “0” and then the indicator of
TRANSPOSE is off.
FUNCTION
Function parameters can be set up with the FUNCTION mode.
Press the FUNCTION button with the indicator light on, the screen displays the current
function and you can set up the parameters with +/- buttons. If there is no operation in
three seconds, the piano will exit the FUNCTION mode automatically with the indicator
light off.
The following parameters can be set up in FUNCTION mode:

EQ
Press the FUNCTION button to enter “EQ” mode. There are 4 types to select, if you
press +/- buttons at the same time, the piano will recover the default value “1”.