Becker BDC-i440 Series, Руководство по сборке и эксплуатации

Страница: 37 / 64

P. [Unit] Setting
range
Description Ex works
226 [Inc]
0..4095
If using an absolute value encoder:
Floor position
Floor position display
0
228 [Inc]
0..4095
If using an absolute value encoder:
Light barrier muting position
The parameter value gives the light barrier muting position in increments.
0
230 [Inc]
0..4095
If using an absolute value encoder:
OPEN limit position
The parameter value gives the OPEN limit position in increments.
0
231 [Inc]
-100..100
If using an absolute value encoder:
Correction of the OPEN limit position
Correction of the OPEN limit position in increments
0
240 [Inc]
0..4095
If using an absolute value encoder:
Door partially open position
The parameter value gives the door partially open position in increments.
0
244 0..3 If using an absolute value encoder:
Configuration of the partially open position
The intermediate stop position can be set directly to typical values using this para-
meter.
0: No intermediate stop position permitted, intermediate stop position is the same
as door OPEN limit position
1: Half door opening distance
2: 2/3 door opening distance
3: Intermediate stop position is programmed in dead-man mode.
3
250 [Inc]
0..4095
If using an absolute value encoder:
Smoke/heat ventilation position (RWA)
Gives the smoke/heat ventilation position in absolute increments.
0
251 0..2 Selection of the target position for the smoke/heat ventilation command
0: OPEN position
1: CLOSE position
2: Smoke/heat ventilation position (with absolute value encoder)
0
410
[s]
0..600
Running time monitoring opening
The time set here is the maximum permissible running time for the OPEN direction.
If the movement takes longer than specified, this leads to the error (E.021) .
30
415 [s]
0..600
Running time monitoring closing
The time set here is the maximum permissible running time for the CLOSE direc-
tion. If the movement takes longer than specified, this leads to the error (E.020) .
30
419 [s]
0..600
Running time monitoring dead-man mode
The time set here is the maximum permissible running time for the OPEN and
CLOSE directions in dead-man mode. If the movement takes longer than spe-
cified, this leads to the error (E.020 / E.021) .
30
37