Becker Avionics
Operating Instructions
Frequency Selection Modes
0638.420-071 Issue 06 02/2021
VHF Transceiver
19
Available modes:
•
Standard mode
•
Direct tune mode
•
Channel mode
•
Scan mode
Standard mode
Direct tune mode
Channel mode
Scan mode
•
The availability of the modes depends on the adjustments in
the configuration setup*.
* For details please refer to related manual:
http://www.becker-avionics.com/manuals/
Communication
→
VHF Transceiver
The modes "Standard Mode", "Direct Tune Mode" and "Channel Mode" have
different layouts for the selection of the operating frequency.
•
The modes are selectable with short push of the of the "MDE" key, one after
the other.
o
The display shows one by one: "Standard Mode", "Direct Tune Mode"
"Channel Mode", "Standard Mode", and so on.
•
During the changes between the modes the active frequency is always the
same and active.
The mode SCAN is a sub-mode of standard mode and is for monitoring two
frequencies at the same time.
•
Push
"↕/SCN" key (2
s) to start/stop the scan function.
127.000
118.005
SQL
SQL
118.005
BAT 13.5V
SQL
125.875
CH
TWR EDSB
01
127.000
118.005
SQL
SCAN
