Becker active.5s EU Скачать руководство пользователя

Страница: 129 / 157

129

TOOLS

>>>

• With the

and

buttons you

can change the section of the
map.

• With the

button you can

display the complete route on
the screen if available.

You can select another section of the
map by dragging.

Country information

The country information enables you to
display country-specific information for
numerous countries (maximum permit-
ted speed, alcohol limits, etc.).

Press the

Country information

button.

The list of countries is displayed.

Press the button for the desired
country.

The country-specific information is
displayed (maximum permitted speed,
alcohol limits, etc.). Click on these
symbols to display additional
information.

Below you will find a description of the
symbols used:

Note:

Please note that the information may
not be complete and other regulations
may apply in the various countries.

Содержание active.5s EU






























































































































































Результаты поиска

Содержание active.5s EU

Отзывы:

Похожие инструкции для active.5s EU

Бренды по названию

Популярные бренды

Becker active.5s EU, Руководство по эксплуатации

Результаты поиска

Содержание active.5s EU

Отзывы:

Похожие инструкции для active.5s EU

Бренды по названию

Популярные бренды