Becker A100/25 5E, Руководство по сборке и эксплуатации

Страница: 3 / 20

Contents
General
These drives are quality products with many features and advantages.
▪
Compact design
▪
Can be installed in any position
▪
Plug-in control cable
▪
Universal power supply 3~230 V/400 V/50 Hz
▪
TÜV type examination – Mark approval certificate in accordance with DIN EN 12453
Please observe these Assembly and Operating Instructions when installing and setting the equipment.
Explanation of pictograms
Caution
Denotes a potentially hazardous situation. If this is not avoided, injuries may result.
Attention
Denotes a potentially hazardous situation. If this is not avoided, the product or some‐
thing in its vicinity may be damaged.
Note
Denotes user tips and other useful information.
Warranty
Structural modifications and incorrect installation which are not in accordance with these and our other instructions can result in
serious injuries, e.g., crushing of limbs. Therefore, structural modifications may only be carried out with our prior approval and
strictly in accordance with our instructions, particularly the information contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intended use is not permitted.
The end product manufacturer and fitter have to ensure that all the relevant current statutory, official and, in particular, EMC regu‐
lations are adhered to during utilisation of our products, especially with regard to end product manufacture, installation and cus‐
tomer advice.
Intended use
The type of plug-in drive featured in these instructions is exclusively designed for indoor use for the operation of sectional doors
whose inherent weight is balanced by springs or a counterweight, or for special applications (only with express approval of the
drive manufacturer).
The plug-in drives must not be used in potentially explosive areas. If the drives are to be used outdoors, special connecting cables
are required; PVC connecting cables must be placed in a protective conduit. The plug-in drives of type AE may only be operated in
connection with a suitable control unit. This control unit must be able to evaluate the single-turn absolute value encoder in AE
drives from the drive manufacturer.
Other applications (e.g., roller doors, vertical lift gates, hoisting devices, awnings, winders), uses and modifications are not permit‐
ted in order to protect the safety of the users and others since these actions can impair the system’s safety and carry the risk of
personal injury and property damage. The drive manufacturer does not accept liability for damages or injury arising from such ac‐
tions.
Always observe the information in these instructions when operating or repairing the system. The drive manufacturer does not ac‐
cept liability for damage or injury resulting from improper usage.
3