fr
en
de
nl
27
What to do if...?
Problem
Cause
Remedy
Awning extends in jerky
movements.
The SC211 batteries are
almost dead.
Insert new batteries.
Awning does not move.
1. Batteries in SC211
are dead.
2. Batteries are
inserted incorrectly.
1. Insert new batteries.
2. Insert batteries
correctly.
Awning does not extend
to the limit position and
then retracts despite
calm conditions.
Vibration is detected
when the awning is
extending.
Adjust the wind
threshold on the master
transmitter.
Awning does not react
to wind.
1. The SC211 is not
programmed.
2. The wind threshold
is not at the correct
setting.
1. Programme the
SC211.
2. Adjust the wind
threshold on the
master transmitter.
An increase or decrease
in the awning’s angle
of inclination is not
detected.
1. The rotary switch for
the release angle is
set to “0”.
2. The initial angle of
inclination has not
been programmed.
1+2. Set the release
angle and pro-
gramme the initial
angle of inclination.
Becker-Antriebe
GmbH
declares
that
the
device
Centronic
SensorControl SC211 complies with the fundamental requirements and other
relevant guidelines of Directive R&TTE 1999/5/EC.
Intended for use in the following countries: EU, CH
Subject to technical changes without notice.
General Declaration of Conformity
