Beck GmbH & Co. Elektronik
Bauelemente KG
Eltersdorfer Str. 7
90425 Nürnberg
Germany
Tel.: +49
– (0)911 – 9 34 08 – 0
Fax: +49
– (0)911 – 9 34 08 – 28
E-Mail: [email protected]
Internet: www.beck-elektronik.de
Preliminary
Product Specification
EPD Driver Board
Page 4 of 12
To connect the EPD there are three connectors on the board (see Figure 1):
“ADA” - universal connector, “16 BIT” – connector for the EPDs with 16 data
bus and “8 BIT” – connector for EPDs with 8 bit data bus. It is allowed to use
only one connector for one display connection.
Figure 1: Top View of Typical Board Configuration
Before connecting an EPD to one of the ports on the driver board it is
important to check the conformity of the signals, defined in the specification of
the EPD driver and the display‘s documentation.
Note: in case of inconformity of the signals on the EPD driver board,
please contact the producer. It is possible to provide a suitable
connector.
