com
.
tom
GRAPHIC 4.11
Getting Started V1.1
Copyright © 2014 Beck IPC GmbH
Page 5 of 14
If no action is taken, the panel will automatically continue by loading the URL that has been
previously configured. If this URL cannot be found, this page will be shown again and the
system will try to reconnect again.
Now you are in the “Setting” Menu and can go ahead with the next step.
3.3
Step 2 – Configure the Network Settings of the com.tom GRAPHIC
Press on
'Network Settings'
, the Page to enter the network configuration of the com.tom
GRAPHIC. DHCP for IP and DNS server is activated by default settings.
Alternative you can configure a static IP address, DHCP, subnet mask and gateway.
Therefore press the DHCP button, the change is displayed by the button.
In that case you have to touch in the `field` IP address and enter your static IP with the
appearing Key-Pad. In the same way you have to configure the Subnet mask and the
Gateway.
'DNS via DHCP' is activated by default settings.
Alternative you can configure the DNS server, if there a server is in your network.
Therefore press the DHCP/DNS server button , the change is displayed
by the button.
In that case you have to touch in the `field` DNS server and enter your static IP with the
appearing Key-Pad.