Email: [email protected]
*Always mount this unit in safe and stable matter.
4.Cleaning
Due
to
fog
residue, smoke, and dust cleaning the internal and external
optical lenses must be carried out periodically to optimize light output.
1.Use normal glass cleaner and a soft cloth towipe down the outside casing.
2 .Clean the external optics with glass cleaner and a soft cloth every 20 days.
3 .Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture
Operates ( i . e .
s m o k e ,fog residue , dust ,dew ) .
5.Trouble Shooting
Listed below are a few common problems the user may encounter, with solutions.
A:The unit does not work, no light and the fan does not work
1. Check the connection of power and main fuse
2. Measure the mains Voltage on the main connector
3. Check the power on LED
B:Unit not responding to DMX Controller:
1. DMX LED should be on , if not , check DMX connectors, Cables to see if link
properly.
2. if the DMX LED is on and no response to channel, check the address settings and
DMX polarity.
3. If you have intermittent DMX signal problems, check the pins on connectors or on
PCB of the unit or the previous one
4. Try to use anther DMX controller
5. Check if the DMX cables run near or run along side to high voltage cabes that
