Jul 2011, V 1.0
4
Installation Guide E100M
Step 4
: Install a fitting into the ball valve on
the air regulator that is compatible with the
shop air (due to a variety of applications, this
part is not supplied by BECCA).
Connect the shop air to the ball valve (with
the Ball valve in the “Off” position).
Step 5
: Check large white drain hose to be
sure is attached through the lid of the
container.
Check small white suction hose to be sure it
is all the way down to the spacer.
Attach Bubbler to the clip located on the
door.
.
.
