ATTACHING TO A DIN RAIL REMOVING FROM A DIN RAIL
MOUNTING POSITIONS
R
emove MX-200e from a DIN rail.
1-2.
Push down the MX-200e to free the bottom of the
clip from the DIN rail.
3.
Unhook the top of the clip and pull the MX-200e
away from the DIN rail
DIN RAIL MOUNTING
DIN RAIL MOUNTING OPTIONS
K
IT CONTAINS:
DIN Rail Clip and Six (6) Clip Mounting Screws
T
he DIN Rail mounting kit is designed to securely attach and clip the MX-200e onto a TS35 or standard 35mm top hat (EN
500022/BS 5584) DIN rail in the horizontal position.
T
wo (2) mounting locations to mount the DIN rail clip on the surface of MX-200e, back or rear side.
P
lease follow the steps to complete DIN rail mounting installation.
C
lip and secure the MX-200e onto a DIN rail.
1.
Hook the top of the clip onto the top edge of the DIN
rail. Make sure the clip is firmly against the rail.
2.
Push down the bottom of the MX-200e to snap it
onto the lower edge of the DIN rail.
3.
The MX-200e is now mounted on the DIN rail.
A
ttach and fasten the DIN rail clip (known as clip)
to the back or rear side of the MX-200e using two (2) clip
mounting screws included in this mounting kit.
1
.MX-200e
2
.DIN rail clip
3
.Mounting Screws
I
II
I
nstall clip in either vertical or horizontal position
I
I
SUPPORT:
Visit us at
