Device Configuration
Interface Setup
– LAN
46
BEC MX-230 M1 User Manual
IGMP snooping, multicast traffic of a group is only forwarded to ports that have members of that group.
Dynamic Route:
Select the RIP version from RIP1 or RIP2.
DHCPv4 Server
DHCP (Dynamic Host Configuration Protocol) allows individual clients to obtain TCP/IP configuration
at start-up from a server.
DHCPv4 Server:
If set to
Enabled
, your MX-230 M1 can assign IP addresses, default gateway and
DNS servers to the DHCP client.
If set to
Disabled
, the DHCP server will be disabled.
If set to
Relay
, the MX-230 M1 acts as a surrogate DHCP server and relays DHCP requests
and responses between the remote server and the clients. Enter the IP address of the actual,
remote DHCP server in the Remote DHCP Server field in this case.
When DHCP is used, the following items need to be set.
Start IP:
This field specifies the first of the contiguous addresses in the IP address pool.
IP Pool Count:
This field specifies the count of the IP address pool.
Lease Time:
The current lease time of client.
Physical Ports:
Select to determine if the DHCPv4 server is applicable to the specific port or ports. By
default, all ports can obtain local IP from the DHCPv4 server.
DNS Relay:
Select
Automatic
detection or
Manually
specific Primary and Secondary DNS IP addresses
Primary / Secondary DNS Server:
Enter the IP addresses of the DNS servers. The DNS
servers are passed to the DHCP clients along with the IP address and the subnet mask.
Option 66:
Set the IP or hostname of the TFTP server for devices, like IPTV Set Box, to get
configuration settings from the TFTP server.
Option 160:
Set the IP or hostname of the TFTP server for devices, like IPTV Set Box, to get
configuration settings from the TFTP server. (The option 160 is an extended feature in DHCP option,
similar to option 66, but using http or https protocols.)
Fixed Host